2018-2023 Wrangler 2.0 Power Package
Description
2018-2023 Wrangler 2.0 Power Package
The 2018-2023 Wrangler 2.0 Power Package by FMS Performance has been custom built for optimum performance gains. FMS has been building custom Power Packages since 1974. We have created this program to help you plan the type of custom Performance system you would like. Choose all or a few, add professional installation for a guaranteed finish.
2018-2023 Wrangler 2.0 Intercooler Pipe
Mishimoto has developed a direct-fit intercooler pipe for the 2018+ Jeep Wrangler JL 2.0T that lets you maximize the performance of your turbocharged Hurricane engine. Our kit replaces the weak, unattractive, and restrictive stock intercooler pipe with a free-flowing and durable cast-aluminum pipe. By smoothing out the bumps, dips, and curves of the stock pipe, we were able to improve flow by 36% for dyno-proven gains of up to 8 lb-ft of torque and 5 horsepower. But power isn?t the only improvement we?ve made. This pipe is constructed from 100% cast aluminum for greater strength against heat and high boost pressure. The included silicone couplers with DuraCore? technology are constructed from five layers of silicone and heat-resistant fibers for greater durability and strength. The DuraCore? inner lining is also more resistant to fuel and oil for greater longevity. To add another layer of durability, this intercooler pipe is powder coated in our wrinkle black finish for maximum resistance to corrosion and the elements. This cast aluminum intercooler pipe also allows for even more customizability and future upgrades. An area of thicker casting at the end of the pipe allows you to drill and tap for anything from boost sensors, to nitrous or methanol injection. We?ve also included a removable bypass valve adapter that allows you to use the stock bypass valve or aftermarket blow-off valves. Like all Mishimoto Jeep Wrangler parts, this 2018+ Jeep Wrangler JL 2.0T intercooler pipe is backed by our Mishimoto Lifetime Warranty.
Exhaust Systems for your 2018-2023 Wrangler 2.0 Power Package
FMS Performance Wrangler JL Series axle-back or Cat- Back exhaust systems complement your Jeep JL on and off-road. Mandrel bent 409 stainless steel tubing and free-flow muffler delivers increased exhaust flow, performance and tuned sound. MIG welded for durability the system uses factory mounting locations for an OE-style fit and stays put under any driving condition. Dual 4-1/2″ black powder coated stainless steel tips that makes this system look as good as it performs. A free-flowing, stainless steel, muffler is used to absorb high pitch tones producing a powerful sound and unleashing more horsepower and torque potential. OE-style bayonet hangers are used to maintain a stable pipe location during any driving conditions. The bayonet tip holds the hanger bushing in place for an OE style, long lasting fit.
Our custom exhaust fabricators are the best in the industry. The system is completely leak checked. No rattles, leaks or crooked tips here! Choose sound level, design, and tip that suits your personality best.
Cold Air Intake Kit
FMS Performance air intake systems replaces the restrictive factory air filter and air intake housing on your new Wrangler JL. FMS intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable Power and Acceleration throughout the engine’s RPM range. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensor and crank case vent hoses. The oversized cone shaped air filter can be used for up to 100,000 Miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points.
Computer Tuning for your 2018-2021 Wrangler 2.0 Power Package
FMS has teamed up[ with aFe POWER to develop the next level SCORCHER BLUE Power module. It is the next generation of Plug and Play electronic modules to increase the performance of your Wrangler JL turbo and improve drivability. It is the fastest way to gain safely significant amount of horsepower and torque without modifying or leaving any trace on the Engine Control Unit (ECU). A LED light switch provides in-cabin on-the-fly Power adjustments with different preset modes. Yet the SCORCHER BLUE power module also have the capability to connect via Bluetooth to your iOS or android device and provides power adjustment, gauges for the engine parameters, custom tuning of the different power modes, upgradability to the latest tunes, measure acceleration time and more. The app is downloadable for free on the app store or play store.
Throttle Booster for your 2018-2021 Wrangler 2.0
8 REASONS WHY YOU NEED A PEDAL COMMANDER:
2. You can save up to 20% in fuel economy using Eco Mode.
3. It comes with 36 sensitivity settings so you can fine-tune to your personal preference.
4. It does not void any warranty or leave any traces on your ECU.
5. It’s an easy plug-and-play installation.
6. It is now Bluetooth enabled so that you can control the unit from your phone using the Pedal Commander App.
7. We offer a 30-day money-back guarantee in case you are not happy. (You will be)
8. It comes with a 2-year product warranty in case anything goes wrong.
Professional Installation at FMS Performance
Our custom exhaust fabricators are the best in the industry. The system is completely leak checked. No rattles, leaks or crooked tips here!
We all know that the right tools for the right job is very important. At FMS Performance we believe that using the the right tools for header installation starts with the right installer.
Our technicians have been professionally educated and have completed industry degrees from accredited schools. They also continue their education with a daily practice and updates when available.
FMS has a specialist for each segment of installation. We prefer to supply you with the parts we install but we can install your supplied products as well.
FMS Performance offers and installs cold air intake kits. Installing and custom building performance exhaust systems. Our stores install automotive computer tuners. headers. superchargers. tonneau covers. suspension kits, lowering and lifting. We install shocks and struts. FMS offers complete brake kit or brake service. We mount and balance wheels and tires.
We can help with almost anything truck accessory related. For your convenience you can select the button below for a quote or appointment. Check us out on FaceBook.
Prices are subject to change and can vary per location
