Approved Manifold Catalytic Converter
Manifold Catalytic Converter or Universal Catalytic Converter
Should I purchase a Universal or Manifold Catalytic Converter?
First of all universal Car Sound converters are designed to be installed by a professional installer because they typically require some welding. The Direct Fit Car Sound catalytic converter is designed so you may unbolt the original and bolt back on the replacement. For that reason the Emission compliance of the converters will meet or exceed Fed or CARB standards.
How do I know that the Manifold Catalytic Converter I purchase is (CARB) California Air Resource Board approved?
You can check with CARB on the approval for your car or truck by contacting the Helpline at 1-800-242-4450. You may also contact FMS for a quote or another opinion. Finally you may click this link to select your search https://ssl.arb.ca.gov/AftermarketParts/catalysts
What is the Warranty on a Replacement Manifold Catalytic Converter?
Federal EPA regulates a 2 year or 25,000 mile guarantee
California CARB regulates a 5 year or 50,000 mile guarantee
Factory replacement converters from the dealer have a warranty for 1 year or 12,000 miles. Most noteworthy is cars have a 8 year 80,000 mile warranty on the OE converter the vehicle came with. If your car is within the 8/80 certainly call your dealership with your VIN number so they may assist you with the warranty information.
My car has a PO420! Does that mean my converter is bad?
NO. The P0420 code, by definition reads “bank one Catalyst Efficiency low” as a result most people will just replace the converter. A vehicle displaying this code is indicating that something is causing the converter to operate out of specification. Furthermore, a diagnostic and certainly an inspection are required before condemning any parts as “bad” or defective.
While you still may need a Manifold Catalytic Converter. FMS can perform a Catalytic Converter Pre-Test. The inspection is free with the purchase of needed components to correct the issue. Please make an appointment to drop the vehicle off for the complete inspection.
Catalytic Converters are emission control devices that are designed to last the life of the vehicle, also do not normally require replacement without cause. A check engine light for catalytic efficiency does not by itself condemn a catalytic converter. There could be another reason or even more parts that have failed and do not necessarily require a catalytic converter replacement. Hence per example an oxygen sensor not functioning correctly. Remember to have your vehicle diagnosed properly before replacing a catalytic converter. If you would like to schedule an appointment for a complete diagnosis click here.
How can I determine my cars emissions certification levels?
All vehicles will come with a VECI (Vehicle Emission Control Information) label located in the engine compartment.
Can I use a catalytic converter cleaner on my car?
Yes, we suggest Cataclean by Mr Gasket. Cataclean contains solvents that can break down deposits formed by oxidation and polymerization of hydrocarbon in fuel delivery systems. Cataclean also includes acetone which is known to improve the efficiency of fuel combustion. When Cataclean combusts, carboxylic acids, aldehydes and active peroxy compounds are formed. These compounds in the exhaust vapors work to clean the surfaces inside the converter. The result is the removal of deposits from the surface of the core, which increases the catalyst’s ability to remove harmful exhaust emissions such as, carbon monoxide & nitrogen oxides.
What is a High Flow catalytic converter?
Most high flow catalytic converters flow higher than OE in flow capacity. The 400 CPI cell density of most high flow catalytic converters will out flow an OE for the same application while providing the necessary functionality.
What is a Oxygen Sensor?
The Oxygen Sensor monitors the amount of residual oxygen in the exhaust. Before being released into the atmosphere, exhaust gases pass through a catalyst. This is where toxic substances in the gases are purified. In order to increase the efficiency of the catalytic converter, the combustion of injected fuel and inhaled atmospheric oxygen must be precisely controlled at the right ratio. The Engine ECU (computer) uses information provided by the oxygen sensor to detect the difference between the actual air-fuel ratio and the ideal air-fuel ratio to adjust the amount of fuel injection.
When should I replace my Oxygen Sensor?
The oxygen sensors are not among the maintenance items that need to be replaced regularly, like oil and air filters, so they typically are replaced only when they fail.
Oxygen sensors are a critical component of the fuel and emissions systems because they monitor the amount of oxygen in the exhaust. For that reason they transmit the information to the engine computer. So it adjusts the air-to-fuel ratio accordingly. If an oxygen sensor fails, the engine computer won’t be able to correctly set the air-fuel ratio. Which could also result in lower fuel economy. While consequently raising emissions and damage to other components, such as an overheated catalytic converter.
Signs you need an Oxygen Sensor.
No vehicle that we’re aware of has a warning light that signals when an oxygen sensor has failed. So as a result you have to rely on other vital signs to alert you when you have a bad oxygen sensor. Such as the check-engine light on the dashboard illuminating and increased fuel usage.
Also our service areas include California, New York, and Maine. For installation centers see San Bernardino, Redlands, Colton. Also Riverside, Rialto, Highland. Furthermore Fontana, Hesperia, Victorville, Mentone. We also service Loma Linda, Crestline, Lake Arrowhead, and Grand Terrace. Likewise Rancho Cucamonga, Palm Springs, Palm Desert, Cathedral City. Furthermore Calimesa, Yucaipa, Hemet, Sun City, Menifee, and finally Temecula.